YSI IQ SensorNet 2020 XT Terminal - Manual (Page 185)

System 2020 XT USB Accessories and options
10 - 1 ba76019e01 12/2012
10 Accessories and options
Note
Other accessories for the IQ S
ENSOR N ET are given in the YSI catalog
or on the Internet.
Description Model Order no.
IQ S ENSOR N ET cable - please specify required
length in m when ordering
SNCIQ
SNCIQ/UG
480 046Y
480 047Y
IQ sensor connection cable
– 1.5 m
– 7.0 m
– 15.0 m
– Special length up to max. 100 m
– 20 m (seawater version)
– 25 m (seawater version)
– 50 m (seawater version)
– 75 m (seawater version)
– 100 m (seawater version)
– Special length (seawater version)
SACIQ-1.5
SACIQ-7.0
SACIQ-15.0
SACIQ-SO
SACIQ-20.0 SW
SACIQ-25.0 SW
SACIQ-50.0 SW
SACIQ-75.0 SW
SACIQ-SO SW
SACIQ-SO SW
480 040Y
480 042Y
480 044Y
480 041VY
480 045Y
480 066Y
480 060Y
480 067Y
480 062Y
480 064VY
Set with four cable glands for cable sheath
diameter of 7 to 13 mm EW/1 480 051Y
Sun shield for a unit of up to three stacked
MIQ modules plus docked terminal SSH/IQ 109 295Y
Sun shield for a single MIQ module plus docked
terminal SD/K 170 109 284Y
Mounting kit for fixing the SD/K 170 sun shield on
horizontal or vertical pipes MR/SD 170 109 286Y
Kit for wall mounting of a MIQ module WMS/IQ 480 052Y
Set for panel mounting of MIQ modules;
switch panel aperture 138 x 138 mm according to
DIN 43700 or IEC 473
(max. thickness 15 mm) PMS/IQ 480 048Y
Kit for mounting of MIQ modules on a 35 mm top
hat rail in accordance with EN 50022 THS/IQ 480 050Y
Set for remote transmission MIQ/TM/SET 902 887Y