YSI IQ SensorNet 2020 XT Terminal - Manual (Page 92)

Operation System 2020 XT USB
4 - 14 ba76019e01 12/2012
4.4 Display of current measured values
Several options can be selected for displaying the measured values:
 Measured values (1 sensor)
The measured value is shown numerically and as a bar graph on the
Measured values (1 sensor) display (see section 4.4.1)
 Measured values (4 sensors)
The Measured values (4 sensors) display provides an overview of a
maximum of four IQ sensors or differential sensors (see section
4.4.2)
 Measured values (8 sensors)
The Measured values (8 sensors) display provides an overview of a
maximum of eight IQ sensors or differential sensors (see section
4.4.3)
 Display local values or all values
Here you can switch between the display of the IQ sensors selected
for the measurement location and the display of all the IQ sensors
(see section 4.4.4).
Switch between the different display types as follows:
Fig. 4-8 Display/Options
1 Call up the measured value display with <M>.
2 Using <OK>, open the Display/Options menu.
3 Select and confirm a display option with <
> and <OK>.
The selected display is activated .