Hach-Lange DR 6000 User Manual - Manual (Page 101)

101
Expanded programs
Concentration Factor:
1. Press Concentration Factor: Off in the "Options" menu.
2. Press On to highlight this feature.
3. Press the Factor button and enter the factor.
4. Press Unit and select the corresponding units for
concentration from the displayed list.
5. Press OK to confirm.
Concentration Resolution:
1. Press Concentration Resolution in the "Options" menu.
2. Select the resolution.
3. Press OK to confirm.
4. Press Return to return to the results screen.
Concentration Factor:
Off/On
Multiplication factor for converting absorbance values into concentration values.
Concentration
Resolution
To select the number of decimal places.
Save as User Program To store the selected parameters as a User Program, refer to section 6.1, page 79 .
Reading Mode
Single Reading: One measurement result is shown after tapping on Read.
Continuous Readings: After the zero measurement, all readings are displayed automatically
and continuously.
Carousel 1 inch square: Optional measurement of carousel insert with up to 5 square cells.
Carousel 1 cm square: Optional measurement of carousel insert with up to 7 square cells.
Recall measurement
data Recall saved measurement data, wavelength scans or time courses, refer to section 5.3,
page 42 .
Instrument Setup mode Basic data of the instrument, refer to section 5.2, page 25 .
Table 12 Options for Single Wavelength (Continued)
Options Description