Hach-Lange DR 6000 User Manual - Manual (Page 94)

94
Expanded programs
1. Press Next and enter the unit for C1.
2. Press Next and enter the designation for C1.
3. Press Next and decide whether an upper or lower limit must
be defined.
If yes, press On and define the upper or lower limit with the
corresponding key. Press OK to confirm.
>=<
Press >=< to include logic statements/links/conditions in
the formula. The following functions are available:
= (Equal to), < (Less than), > (Greater than), <= (Less
than or equal to), >= (Greater than or equal to), IF,
THEN, ELSE
When the evaluation formula C1 has been entered
completely, press OK to confirm. Press OK again to
return to the Formula display.
When the formula C1 has been entered and confirmed,
the parameter name, upper and lower limits of the
measuring range and display result (yes, no) can be
entered.
Table 11 Description of the keys for the editing of formulae (Continued)
Display Key Description