Hach-Lange DR 6000 User Manual - Manual (Page 152)

152
Help Guide
A list of preset times will be displayed.
6. Select the necessary time.
7. After the timer expires, return to the Help Guide by pressing
the Information symbol.
8. The next Help display is activated.
9. Press Cancel to go back to the display of the measurement
for the test/the procedure.
10. Press the symbol for information to go back to the last
current page of the Help Guide and to continue with the test.
A.2 Display of the Help Guide for barcode programs
1. Press Barcode Programs in the Main Menu. Refer to
section 5.5, page 69 for more information.
2. Press the information icon.
3. The list of barcode tests is shown in ascending numerical
order.
4. Select the required test.
5. Prepare the barcode test in accordance with current process
specifications and follow the step-by-step instructions for the
procedure.
Note: Make sure that the values of the current process specification
are used.
Note: Use the arrow keys to navigate through the next or previous
pages or to the first or last page.