Hach-Lange DR 6000 User Manual - Manual (Page 31)

31
Standard programs
6. Select the required security level (two keys, one keys or off)
and confirm using OK.
7. Confirm the Security List using OK to return to the
"Security" menu.
8. Press OK to return to the "Instrument Setup" menu.
Note: The alphanumeric keypad for entering the password appears
when a user tries to reach a locked setting.
5.2.4.1 Assign operator security level
Every operator with an operator ID can be assigned a security
level. This assignment is connected to the operator password.
Setup must be coordinated with the security administrator and
the operator.
1. Select Operator ID from "Instrument Setup".
2. Set up an operator ID (refer to section 5.2.1 ).
3. Tap on Operator Password.
4. Enter the operator password and confirm with OK.
5. Tap Security Level <Off>.
6. Enter the security password and confirm with OK.
The current security level for the selected operator is shown.