Hach-Lange DR 6000 User Manual - Manual (Page 61)

61
Standard programs
Note: The reagent blank icon is shown in the result display (refer to
arrow) when the function is active.
5.4.8 To carry out a multiple determination
A sample can be measured several times using the multiple
determination functions.
1. Before reading the concentration, press Options > More >
Multiple Determination.
2. Press On.
The number of the multiple determinations is shown under
"Measurements".
3. To change the value displayed on the button, press the
button. Use the alphanumeric keypad to enter the new value.
Press OK to confirm.
4. The Multiple Determination icon will be shown on the display.
5.4.9 Selection of Reading Mode
The Reading Mode functions enable the sample to be analyzed
with a single reading, continuous readings or with an optional
carousel insert (sample changer).
1. Before reading the concentration, press Options > More >
Reading Mode.
2. Select the required reading mode.
Select Single Reading to perform just one measurement
after Read is pressed.
Select Continuous Readings. After the zero measurement
the current measurement value is shown continuously,
without actuation of Read.