Luminex xPONENT for MAGPIX 4.2 - Manual (Page 121)

Deleting CAL and VER Kit Information
1. Open the Maintenance page, then open the Lot Management tab.
2. In the Active Reagents section, select the kit you want to delete from the Calibration Kit
or Performance Verification Kit lists.
3. Click Delete Kit.
CAUTION: There is no confirmation dialog box when you delete a kit.
Commands and Routines (Cmds & Routines) Tab
Maintenance > Cmd & Routines
Use this tab to create a routine or to edit, delete, or run a selected routine or command. You
can also run one or more maintenance commands with or without saving them as a routine.
CAUTION: The Drive Fluid and the solution in which beads are stored
contain Proclin, which can cause an allergic reaction. Use
personal protective equipment, including gloves and safety
glasses.
This tab contains the following:
xPONENT for MAGPIX 4.2 Software User Manual
108