Luminex xPONENT for MAGPIX 4.2 - Manual (Page 37)

• Click Details to display the Edit Samples subtab, on which you can view or edit sample
details for the selected protocol.
• Click Create Batch to name the LIS batch for a protocol. This opens the Batches page,
Batches tab, with the following subtabs displayed:
• Protocol
• Stds & Ctrls
• Plate Layout
Edit Samples and Create Sample Subtab
Samples > Samples > Edit Samples or Create Sample
Click Create Samples on the Samples tab to display this subtab. Use this subtab to type and
view sample information.
This tab contains the following:
Protocol - Displays the protocol selected in the Samples tab. If xPONENT has a LIS license
enabled, any sample details provided by the LIS also appear in the Sample list.
Version - Displays the protocol version number. This cannot be edited.
NOTE: If a protocol is created using the same name and version as a
previously deleted protocol, previous or pending samples are re-
linked to the added protocol.
Sample - If you have the LIS-enabled version of the software and are currently connected to
the LIS, the sample list autopopulates when the LIS provides samples orders. You can only
view or run a sample list created in the LIS; you cannot edit it. Use Create New Samples to
create a new sample. After you have typed and saved the sample information, it appears in
the list to the left. This list displays the samples you have already created. To reorder the
sample’s acquisition location, use the move arrows.
xPONENT for MAGPIX 4.2 Software User Manual
24