Luminex xPONENT for MAGPIX 4.2 - Manual (Page 99)

3. Type the name of the kit in the Name box, the lot number in the Std/Ctrl Kit Lot# box,
the expiration date using MM/DD/YY format in the Expiration box, and the manufacturer
in the Manufacturer box.
4. Click Apply Std Lot if you want to apply a standard lot. The Select Lot dialog box opens.
Click a lot and select OK.
5. Click Apply Ctrl Lot to apply a control lot. The Select Lot dialog box opens. Select a lot
and click OK.
6. Alternatively, type the appropriate information in the Assay Standard Information and
Assay Control Information sections. The number of standards, controls, or both in
these sections is defined in the protocol. If your batch uses controls, select Expected,
Low or High from the Show Value options. Use the Apply Values arrows to apply
values down or across the range of analytes.
7. Click Save.
Protocols Tab
Protocols > Protocols
The following installed protocol information is shown on this page:
• Name
• Version
• Manufacturer
• Date
In addition, these action buttons are available at the bottom of the page:
• New Stds & Ctrls - Click this button to open the Std/Ctrls Details page.
• Plate Layout - Click to open the Plate Layout tab.
• Delete
xPONENT for MAGPIX 4.2 Software User Manual
86