Luminex xPONENT for MAGPIX 4.2 - Manual (Page 78)

Click an analyte to open the Analysis Settings dialog box from which you can select a
new analysis setting for the analyte.
• Progress - Click to display real-time progress of the well acquisition. Analyte counts are
displayed in a dynamic bar graph as they are acquired. The scroll bar at the bottom of
the Progress display scrolls through the analyte list. A zoom feature on the left of the
display enables you to enlarge the image.
• Approve - Opens the Batch Approval Confirmation dialog box, which contains the
data for analytes selected in the Results tab. Click Yes to approve the batch. The dialog
box confirms the approval.
• Validate - Validates an entire selected row or cell in the Results table. Average rows or
cells cannot be selected. If you haven’t selected an item or the item you selected does
not need to be validated, a warning dialog box displays.
• Invalidate - Invalidates an entire selected row or cell in the Results table. The selection
will turn red when invalidated. Select the same item and click Validate to remove the
invalidation status.
• Close - Closes the batch and reopens the Saved Batches tab.
Replaying a Batch
Replay batch uses the raw bead data files from the initial acquisition to reprocess the batch,
and creates a new batch output file. The bead data files are replayed using the analyte,
analysis settings, and plate layout selected in the new batch or protocol. Settings such as
bead type, Volume, and XY Heater have no effect.
Results from replaying a batch are generated in the usual manner, with new .lxb and CSV
files.
Results Page
65