Luminex xPONENT for MAGPIX 4.2 - Manual (Page 30)

FIGURE 2. LED Image-Based Analysis
1 Beads in chamber
2 Red LED (635 nm)
3 CCD Imager
4 Green LED (525 nm)
Running Assays with MAGPIX
General Guidelines
WARNING: Modifying or deleting xPONENT system files can cause
degradation of system performance. Repair modified or deleted
xPONENT system files by uninstalling and re-installing the
xPONENT software. Luminex recommends that you contact
Luminex Technical Support before uninstalling and reinstalling
xPONENT.
WARNING: Using unauthorized third-party software with xPONENT
software can result in corruption or failure of the xPONENT
software. Use third-party software at your own risk. The
operation of the system software is validated only when it runs
alone on the dedicated PC.
NOTE: If you are using a screen saver on the PC on which xPONENT is
installed, xPONENT prevents it from activating. A dialog box opens
each time xPONENT is launched, recommending that the screen
saver and any power management settings be turned off.
Introduction
17