Luminex xPONENT for MAGPIX 4.2 - Manual (Page 86)

• < and > Arrows - Scroll left to right through the sample details.
• ^ and v Arrows - Scroll up and down through the sample details.
• Transmit - For systems configured for LIS transmission, select a single analyte or the
entire sample and click Transmit to send the results.
• Close - Reopens the Saved Batches tab.
In addition, the following information is shown on this tab:
• SampleID
• Samples Status
• Analyte
Viewing Sample Details
1. Open the Results page, then open the Saved Batches tab.
2. Click Saved Batches, then click the batch for which you want to view details.
3. Click Open, then click Sample Details. The Sample Details tab opens. If you are using
an LIS licensed package of the software, click Transmit to transmit sample details to the
LIS database. You can transmit either a single analyte per sample or the entire sample.
LIS Results Tab
This tab displays information about saved batches that contain LIS samples.
Results > LIS Results
Results Page
73