Luminex xPONENT for MAGPIX 4.2 - Manual (Page 138)

• Browse - Opens another dialog box to select the file location for the third-party analysis
program. The selected location appears in the Path box, and the name displays in the
Name box.
• Command Line Parameters - To keep the default command line settings, leave
Command Line Parameters blank. Otherwise, type the command line parameter for
which parameters you want xPONENT to use with the external analysis program. If the
information is supplied with the external analysis program documentation, use that
information. Otherwise, you can type the following parameters built into xPONENT, in any
order:
• #c - Output.csv, full file path
• #p - Protocol name
• #b - Batch name
• #u - Logged in user name
• Set Default - Sets the chosen analysis program as the default analysis program for
xPONENT.
• OK - Saves the chosen settings and exits the dialog box.
• Cancel - Cancels changes and exits the dialog box.
• Remove - Removes the selected program from the Installed Analysis Programs list.
• Edit - Opens the New External Analysis Program dialog box where you can edit the
settings for the selected program.
• Disable Automatic launching of External Third Party Analysis when batches
complete for all protocols - Disables the automatic launch of the third-party analysis
program after batch acquisition.
Arrange Main Page Headers
These options enable you to customize the order in which the Main Navigation Buttons
(pages) display.
• Arrange Main Navigation Buttons - Select or clear the check boxes to display or remove
main page headers. The Home page header cannot be removed. The Admin page cannot
be removed if a security license is not being used, or if the user currently logged in is set
up as a member of the Administrator group profile.
• Main Navigation Arrows - Click a main page header and then click an up or down arrow
to change the selected header’s order of appearance at the top of the window. The Home
page cannot be moved.
• Default - Restores the software to the default page header arrangement.
Maintenance Options
This section displays procedures to use when initializing the system.
System Initialization Procedure - Displays the available selections to use as the default
system initialization procedure. After selecting an option, click Save at the bottom right
portion of the window to save the selection as the default procedure.
Adding an External Analysis Program
To add an external analysis program:
Admin Page
125