Micromod MOD: Modcell 2050R Users Guide User Manual

Page 30

Advertising
background image

IB-23C650

INSTALLATION

VOLT OUTPUT (0 to 10 Volts dc)

Figure 12. Voltage Output Connections

+

Output

Receiver

Precision Dropping Resistor
Typical Value: 250 ohms ±0.01% (less than 10ppm)
Maximum Value: 400 ohms

Note:

For 0 to 10 Vdc signal to receiver, controller output current range
must be set at 0 to 40.0 mA dc when using 250 ohm resistor.

24

Advertising