Micromod MOD: Modcell 2050R Users Guide User Manual
Page 80
IB-23C650
SETUP
Table 4. Milliamp Output Setup Menu
Step
Step Description
Top
Display
9.1
Fixed Output Value.
UP
or
DN
sets fixed initial power up output value.
SCRL
to advance to:
Step 10 if output 2 is installed, and output type is
NOT HC/CC, or
Step 11 if output 2 is installedand output type is
HC/CC, or
Step 1 otherwise (output 2 is NOT installed).
FIXD PWR
10
Retransmission Variable.
UP
or
DN
selects variable. SETPOINT, INPUT 2
and BUS_ONLY selectable only when available
per base configuration menu.
SCRL
to advance to:
Step 1 from NONE, MANUAL or BUS_ONLY, or
Step 10.1 otherwise.
RETRANS
10.1
Retransmission Process High Variable.
UP
or
DN
sets value.
SCRL
to advance to Step 10.2.
RETRANS
10.2
Retransmission Process Low Variable.
UP
or
DN
sets value.
SCRL
to advance to Step 1.
RETRANS
11
Output 2 Current at 100%.
UP
or
DN
sets value.
SCRL
to advance to Step 12.
OUTPUT 2
12
Output 2 Current at 0%.
UP
or
DN
sets value.
SCRL
to return to Step 1.
OUTPUT 2
74