Micromod MOD: Modcell 2050R Users Guide - Manual (Page 64)

IB-23C650
SETUP
Table 2. Input Setup Menu
Step Step Description
Top
Display
5 Engineering Units Label.
UP to begin label entry.
SCRL to advance to Step 6.
1. When UP is pressed to begin entry, the first
label character will begin to flash (if not a space).
2. Use UP or DN to select the desired character.
(Selecting UP first begins at ‘A’; selecting DN
first begins at ‘9’.)
3. SCRL to the next character and use UP or DN
to set it.
4. Repeat through the last character.
5.
SCRL back to the non-flashing label display.
6. Use UP to repeat label entry or SCRL to the
next step.
ENG UNIT
6 Right Bar Displayed Variable.
UP or DN selects type.
SCRL to advance to:
Step 6.1 for DEVIATN, or
Step 1 for OUTPUT.
RIGHT
6.1 Right Bar Displayed Variable.
UP or DN sets percent.
SCRL to return to Step 1.
DEV BAR
58