Micromod MOD: Modcell 2050R Users Guide - Manual (Page 71)

IB-23C650
SETUP
Table 3. Digital Input Setup Menu
Middle
Display
Bottom
Display
Entry Description
LOCKOUT YES
NO
= Locks out the front panel totalizer
commands indicated
R/H,RSET = Run/hold, reset commands locked
if run/stop selected
RESET = Reset commands locked if
run/reset selected
RUN/HOLD = Run/hold commands locked if
run/hold selected
= Allows all front panel commands to the
totalizer algorithm
Also see note in 2.1.2 above.
LOCKOUT YES
NO
= Locks out the front panel selection of active
set-point
= Allows front selection of active set-point
When both digital inputs are used for set-point
selection, this choice applies to both. They are
not independent.
Also see note in 2.1.2 above.
ALLOWED NO
YES
= Digital input transition selects any set-point
for which it is configured, except remote
= Digital input transition selects any set-point
for which it is configured
When both digital inputs are used for set-point
selection, this choice applies to both. They are
not independent.
ACTION REVERSE
DIRECT
Causes a closed contact to be treated as an
open contact and vice versa
INPUT 2 None.
65