Gentec-EO MAESTRO - Manual (Page 11)

MAESTRO User’s Manual Revision 8.1 10
Pressing the I/O key quickly when the MAESTRO is OFF turns the MAESTRO ON (do
not hold the I/O key). To turn the MAESTRO off, press the I/O key. To prevent battery
leakage and to increase battery life, we recommend switching the MAESTRO off when
not in use.
2- LCD SCREEN
Dimensions: 112.9 x 84.7mm RGB color Touchscreen LCD, 640 x 480 Pixels.
To access any of the options or menus, simply touch the appropriate icon or button on the
screen.
1.4 Top Panel Description
Fig. 1-2 MAESTRO Top Panel
1- USB PORT FOR USB KEY
This interface allows the user to insert a USB key for an easy and quick data transfer
without having to connect the monitor to a PC. If your key is not recognized, try using a
new one. Old and slow USB keys are not supported.
2- ETHERNET PORT
This interface allows remote control and data transfers between the MAESTRO and a
computer that has an ETHERNET communication port.
3- EXTERNAL POWER SUPPLY INPUT JACK:
CAUTION
Permanent damage may occur to the optical meter if an external
power supply other than the Gentec-EO P/N 200960A is used.
Please call Gentec-EO or your local distributor if extra power
supplies are needed.
Input voltage required: 9 VDC/1.66A. If input voltage is between 15 and 25 volts, the
monitor will switch to USB power or battery power. If the input power is above 26 volts,
6 5 4 3 2 1