Gentec-EO MAESTRO - Manual (Page 44)

MAESTRO User’s Manual Revision 8.1 43
statistics is fixed
8
. Furthermore, if the acquisition is stopped before the end of the acquisition duration, the
statistics will not be saved to the output file.
Fig. 2-25 Statistics settings popup window
You can set the MAESTRO either to calculate the statistics for a single sample and stop, or to repeat
continuously. Take data for a few seconds or a few days. You have the flexibility to handle any
application, from analyzing a single short pulse with high resolution to sampling performance over a
period of months.
You can choose to compute the statistical analysis continuously, which is the default option, or to
compute it only during a specific time interval. Touch the edit button for the duration in the statistics
settings popup window to display the statistics duration settings popup window. To change the total
duration of the acquisition, touch the edit button under each time value. Touch the OK button
to save the changes or touch the cancel button to ignore the changes. The format of the duration is
dd:hh:mm:ss, which correspond to days, followed by hours, minutes and seconds. When the total
duration is set, touch the OK button to save the changes or touch the cancel button to ignore
the changes.
The MAESTRO automatically clears and recalculates the statistics at the end of each sample period
unless you manually stop it.
8
The sample rate for the statistics is fixed at 12.302 Hz for power detectors and 1 pulse per pulse for
energy detectors.