Gentec-EO MAESTRO - Manual (Page 71)

MAESTRO User’s Manual Revision 8.1 70
Example Response from MAESTRO
Command: *GUM User Multiplier : 1 \r\n
Set User Offset
This command is used to set the value of the offset.
Text Command Parameters Return
OFF 8 characters numeral value
Default: 0
The following example sets offset to 1.5 milli.
Example Response from MAESTRO
Text Command: *OFF0.001500
OR
*OFF1.500e-3
The other option available is the Zero-offset. The Zero-offset operation is done first, before those
of the Multipliers and Offsets
Get User Offset
This command returns the MAESTRO’s correction offset value.
Text Command Parameters Return
GUO None Current offset value
Example Response from MAESTRO
Command: *GUO User Offset : 0 \r\n
Get Zero Offset
This command returns whether the zero offset has been activated or not.
Text Command Parameters Return
GZO None 1: On
0: Off
Example Response from MAESTRO
Command: *GZO Zero : 0 \r\n