Gentec-EO MAESTRO - Manual (Page 83)

MAESTRO User’s Manual Revision 8.1 82
Minimum This value should be divided by the Minimum Unit.
Minimum Unit This is a divider
Average This value should be divided by the Average Unit.
Average Unit This is a divider
Standard Deviation This value should be divided by the Standard Dev Unit.
Standard Dev Unit This is a divider
RMS Stability This value should be divided by 1000.
PTP Stability This value should be divided by 1000.
Current Time In Period Power measurement only. Default is 0.
Total Time of Period Power measurement only. Default is 0.
Pulse Number Energy measurement only. Default is 0.
Total Pulses Energy measurement only. Default is 0.
Average Power Energy measurement only. Default is 0. This value should be
divided by the Avrg Power Unit
Avrg Power Unit This is a divider
Repetition Rate Energy measurement only. Default is 0. This value should be
divided by the Rep Rate unit.
Rep Rate Unit This is a divider
Uncorrected Value This value should be divided by the Uncorrected Value Unit
Uncorrected Value Unit This is a divider
*LOG
Set Logging Start/Stop
This command is used to log data on the connected USB stick (be sure you have a
USB stick connected and that you have configured an acquisition file name).
Text Command Parameters Return
LOG 1 to Start, 0 to Stop ACK
This command starts or stops logging data on the USB stick. This is done using the
Data Sampling settings (sample rate, time, period...).
Passing 0 as parameter stops the acquisition. 1 starts a raw data acquisition.
The Logging starts when the command is issued.