Gentec-EO MAESTRO User Manual
Page 38
Advertising
MAESTRO User’s Manual Revision 8.1
37
Display
Sets and displays the monitor’s display
mode. You can choose between the
following displays:
Real Time
Scope
Needle
Averaging
Histogram (Not available on this
version)
Statistics
In the dual-screen mode, it corresponds
to
the
bottom
display.
For
more
information, refer to section 2.4.3.
DATA
Acquisition
Lets you start, stop, and configure the
data acquisition on a connected USB key
at any time. Touch Start to start the
acquisition on the USB key and touch
Stop to stop before the end of the total
duration
of
the
acquisition.
Touch
Configure to access the Acquisition
menu window (refer to section 2.4.4),
which will allow you to set the acquisition
parameters.
Advertising