Gentec-EO MAESTRO - Manual (Page 87)

MAESTRO User’s Manual Revision 8.1 86
*EAA
Set Anticipation
This command is used to enable or disable the anticipation processing when the device
is reading from a wattmeter. The anticipation is a software-reading acceleration algorithm that
provides faster readings using the detector’s calibration.
Text Command Parameters Return
EAA 1 to turn On, 0 to turn Off ACK
Default: On
*EOA
Zero Offset
This command subtracts the current value from all future measurements the moment
the command is issued to set a new zero point.
Text Command Parameters Return
EOA 0 to turn Off, 1 to turn On. ACK
Default: Off
*VER
Query Version
This command is used to query the device to get information about the firmware version and the
device type.
Text Command Parameters Return
VER Version number and device type.
Example Response from MAESTRO
Text
Command: *VER
<enter> MAESTRO Version 1.03.02