Ntroduction – Gentec-EO MAESTRO User Manual
Page 7
MAESTRO User’s Manual Revision 8.1
6
1
THE MAESTRO SINGLE CHANNEL LASER POWER/ENERGY METER
1.1 Introduction
To obtain the full performance from the MAESTRO, we recommend that you read this manual carefully.
The MAESTRO is a microprocessor-based power and energy meter that uses the latest technology to
provide a multitude of options in a user-friendly environment. It is intuitively accessible using a touch
screen. It is a complete power and energy meter. The MAESTRO provides a statistical analysis of your
measurements. It allows you to store data on an external USB key. Moreover, the MAESTRO can be
updated by connecting a USB key with the new file available on our web site in th
The MAESTRO has enhanced network capabilities that take further advantage of the USB port for data
acquisition and remote control. In addition to the external USB key, it can also transfer data files to a PC
for more sophisticated data analysis. Furthermore, the MAESTRO responds to commands through the
PC interface using the USB port. To transform your PC screen into a virtual MAESTRO, look for the
easy-to-use communications software on our website.
There is no need to enter the head specifications when connecting the new Gentec-EO power or energy
detector heads, for heads version 5 and above. The MAESTRO is already internally set to accept the
latest Gentec-EO wattmeter and joulemeter heads with a DB-15 connector. The MAESTRO supports
both fast and slow heads with a rise time from 5
s to 10 s.
The MAESTRO can reread heads in hot plug situation. Before inserting a new head, wait for the
MAESTRO to stop displaying numbers. Once the head has been detected, the monitor will wait 2
seconds to ensure that the head is properly inserted. If you do not respect these conditions and the head
is not read correctly, reboot the MAESTRO.
Unpacking
Each Gentec-EO MAESTRO is thoroughly tested and calibrated prior to shipment.
Visually inspect every MAESTRO unit after removing it from the shipping containers. If you see any
damage, retain all packaging materials and shipping receipts. Any damage claim should be made
promptly to the transportation company. Notify the nearest Gentec-EO representative concerning the
claim, so that any repair or replacement can be arranged as soon as possible.
Easy software upgrade
Keep in touch with the latest improvements to our user-friendly software by going to our website at
Download the latest software version anytime and install it on the MAESTRO with
the USB key. You will find all the necessary information on downloading and upgrading in section 4.2.