Gentec-EO MAESTRO - Manual (Page 21)

MAESTRO User’s Manual Revision 8.1 20
2.4 Home
The Home menu allows you to access and change any settings for the MAESTRO and the connected
detector head. You can choose between 5 options:

Set Device controls the MAESTRO’s basic parameters;

Set Measure controls the data measured by the detector head;

Display controls the display mode of the data measured by the detector head.

Acquisition controls the acquisition parameters to save the measured data on the USB key.

Startup Config configures the measurement settings at startup.

About displays all the information relative to the current MAESTRO monitor.
Fig. 2-5 The HOME menu window
2.4.1 Set Device
The Set Device lets you set and save the MAESTRO with customized parameters. You can set the time
and date of the device (not yet available), set the displayed significant digit, set the serial commands,
configure the Ethernet, and set the language (English, French, German, or Japanese). To exit the device
settings window touch the exit button or select any other option from the navigation bar at the
bottom of the window.