Gentec-EO MAESTRO - Manual (Page 29)

MAESTRO User’s Manual Revision 8.1 28
Fig. 2-13 Popup window to enter a user defined wavelength
Once you have entered a new wavelength in the MAESTRO, you can save your settings (refer to section
2.4.5).
2.4.2.2 Range
The Range menu window is used to select the signal level read by a detector head. When a new head is
plugged in, the auto mode is the default option. In this condition, the MAESTRO automatically selects the
best range for the value being measured. You can also choose a fixed scale according to the specific
connected detector head. The MAESTRO only shows range values that fall within the detector head’s
range. You can only choose from these available ranges