Gentec-EO MAESTRO - Manual (Page 39)

MAESTRO User’s Manual Revision 8.1 38
2.4.3.2 Real time display
The Power or Energy digital display is presented in giant format for easy reading in all conditions.
Directly below it, as wide as the screen, is the Bar graph display, which presents the measurement in
analog format; very useful for rapidly varying values.
Fig. 2-20 Real time display
With a MAESTRO, you can also choose between the high resolution mode for the most significant digits
available or the standard resolution, to filter out unimportant fluctuations in measurement. You can adjust
the number of digits in the Set Device menu window accessible through the HOME menu
(section2.4.1.2).
2.4.3.3 Scope display
The Scope display gives a quick look at the laser beam’s long-term stability and trend as a function of
time. The current data is also displayed at the top of the graphic display.
To refresh the scope touch the refresh button . The graphic will be erased before new data is
displayed. This is useful when an out of range value has been measured.
Touch the Settings button to access the Scope settings. This will allow you to change the X-Axis
scale, the Y-Axis scale (not available), and to display the statistics. Just touch the edit button to
change the X-Axis and Y-Axis scale (not available). For the X-Axis value, enter the desired display time
period. In case you enter an incorrect value, an error popup menu will prompt you to change it to a valid