Gentec-EO MAESTRO - Manual (Page 36)

MAESTRO User’s Manual Revision 8.1 35
Fig. 2-18 Display menu window
The MAESTRO allows you to have a single full-screen display or a dual-screen display. To select the
desired display touch the appropriate button. If you choose dual display, one of the displays must be Real
Time. Select Real Time, then select any other display mode by touching it. To return to single display
mode, simply touch the unwanted display mode to cancel it. Once the selection is made, touch the OK
button or the cancel button to ignore the changes.
The MAESTRO’s default mode is dual Real Time and Scope display (Figure 2-1).
2.4.3.1 Display Parameters menu bar
The full-screen display fills the entire window, hiding the navigation menu bar. The Display Parameters
menu bar is at the bottom of the window to allow you to quickly view and access different settings. To
retrieve the navigation menu bar, switch to the dual screen display mode by touching the Minimize
button . In the dual-screen display mode, the Display Parameters menu bar is located under the Real
Time display (see figure 2-1).
Fig. 2-19 The Display Parameters menu bar
The current display settings are easily changed by touching the desired parameter in this menu. Touch
anywhere on the screen to deselect the setting.