Gentec-EO MAESTRO - Manual (Page 26)

MAESTRO User’s Manual Revision 8.1 25
Fig. 2-10 Language Configuration menu window
2.4.2 Set Measure
Options in the Set Measure menu define user-adjustable measured data parameters. The Wavelength
can be changed in order to set it to the wavelength at which the detector is used. The power or energy
Range allows you to adjust the scale in order to obtain the best possible resolution. Correction factors
that will affect the reading can be easily programmed. They can be used for a beam sampler, attenuator,
or other optics that require you to multiply and/or add offsets to the detector reading. Trigger Level and
Measure Mode are also found in the Set Measure menu.