Gentec-EO MAESTRO - Manual (Page 84)

MAESTRO User’s Manual Revision 8.1 83
*CAU
Download data
This command is used to send data to the serial port according to the data sampling
setting.
Text Command Parameters Return
CAU None Data in ASCII
*ANO
Set Analog Output
This command is used to enable or disable the output of the current value on the analog port of
the device.
Text Command Parameters Return
ANO 1 to Enable, 0 to Disable ACK
*CSU
Stop the CAU Command
This command is used to stop the real time transfer enable by the CAU Command.
Text Command Parameters Return
CSU None N/A
Query New Value Ready
This command is used to check whether a new value is available from the device. Though
optional, its use is recommended when used with single pulse operations.
Text Command Parameters Return
NVU Available/ Not Available <CR> <LF>
1/0
Example Response from MAESTRO
Text Command: *NVU <enter> New Data Not Available <CR> <LF>
Note that the Query Current Value and Query Statistic Data commands will return the current
values from the device even if they have not been updated since the last query.