Gentec-EO MAESTRO - Manual (Page 14)

MAESTRO User’s Manual Revision 8.1 13
2 GETTING STARTED
This section contains important information concerning the installation and operation of the
MAESTRO.
The MAESTRO is delivered ready to use. Just insert a detector head in the Probe Input Jack (#6 in
Figure 1-2) and press the I/O key. The following window will appear on the monitor (Figure 2-1). It is
separated into four different areas.
Fig. 2-1 MAESTRO Start up window
1- REAL TIME DISPLAY (in dual mode)
The Real Time display shows the current measured value by the detector head (refer to
section 2.4.3.2).
2- DISPLAY PARAMETERS MENU
The Display Parameters menu gives you quick acces s to the MAESTRO’s main settings
(refer to section 2.4.3.1).
3- SCOPE DISPLAY (in dual mode)
The Scope display gives a quick look at the laser beam’s long-term stability and trend as
a function of time. This display can be easily changed using the display parameters menu
(refer to section 2.4.3.3).
4- NAVIGATION MENU (main menu)
The Navigation menu allows you to navigate through the different menu windows to set
the MAESTRO’s options to your specific needs (refer to section 2.3).
1
2
3
4