Gentec-EO MAESTRO User Manual
Page 80
MAESTRO User’s Manual Revision 8.1
79
COMMANDS
*SSA
Set Scale
This command is used to force the display of the current data into a specific range. The
lower range is always zero, and the higher ranges can be found in the table below. The Auto
scale applies the best scale for the current values in real time. In text mode, the parameter must
be one of the identifiers in the table below. Remember that the serial protocol is not case-
sensitive in text mode.
Text Command
Parameters
Return
SSA
Scale identifier or index
ACK
Scale Identifiers:
Text Mode
Scale
Auto
optimum
1p
1 picowatt or picojoule
3p
3 picowatts or picojoules
10p
10 picowatts or picojoules
30p
30 picowatts or picojoules
100p
100 picowatts or picojoules
300p
300 picowatts or picojoules
1n
1 nanowatt or nanojoule
3n
3 nanowatts or nanojoules
10n
10 nanowatts or nanojoules
30n
30 nanowatts or nanojoules
100n
100 nanowatts or nanojoules
300n
300 nanowatts or nanojoules
1u
1 microwatt or microjoule
3u
3 microwatts or microjoules
10u
10 microwatts or microjoules
30u
30 microwatts or microjoules
100u
100 microwatts or microjoules
300u
300 microwatts or microjoules
1m
1 milliwatt or millijoule