Gentec-EO MAESTRO - Manual (Page 61)

MAESTRO User’s Manual Revision 8.1 60
The serial commands format is as such:
*MUL+ 8 character numeral value Ex: « *MUL1.000000 » or « *MUL-1.34e-3 » or «*MUL0.000543 »
*OFF + 8 character numeral value like above
*STL+4 character numeral value like « *STL10.2 » or « *STL0.22 »
*SSE1 / *SSE0 : Single Shoot Energy ON or OFF
*ATT1 / *ATT0: Attenuator ON / OFF (When available)