IntelliTrack Check In/Out - Manual (Page 158)

I NTELLI T RACK C HECK I N -O UT V 7.0
User Manual
130
Note: Inventory can also be created for consumable or both consumable/
check out item definitions by following the instructions in
Adding an Item
to a Location using the Item#/Location or Location/Item# form.
1. Select Manage Command Tab > Inventory Command Set > Item.
2. The Item Data form appears.
3. Select the item to be modified from the Item List pull-down list.
4. Click the Add Item at Location button.
5. The Item at Location form appears.
Enter the site and location by selecting from pull-down lists or entering
new values.
If you enter new values, click Yes to add these sites and locations to the
database.
Enter the on-hand quantity for this location.
6. After entering the site, location and quantity data for the added item,
click the Close button to close the Item at Location form and return to
the Item Data form.
2283.book Page 130 Thursday, July 9, 2009 11:26 AM