IntelliTrack Check In/Out - Manual (Page 331)

Chapter 16
CE Data Transfer
303
1. From the DMS Batch Synchronization Utility, click the Send Data tab
in the Main form to bring this portion of the form to the front.
2. If security is enabled in the system, the Enable Security check box is
available in the Send Data tab of the Main form. In the Send Data to
CE Device portion of the form, mark the Enable Security check box to
activate security in the Batch Portable Application on the handheld
device; user ID and password information (if applicable) will be sent to
the Batch Portable Application.
3. Mark the Send Sites check box to send site information to the handheld
device. The Site List field becomes enabled.
When you elect to send site data, the location, consumable inventory
and check out inventory selections are enabled.
4. Click the drop-down arrow in the Site List field to select All sites or a
specific site to the Batch Portable Application on the handheld device.
5. When you mark the Send Sites check box, the Send Locations check
box becomes enabled. To send location data to the handheld device,
mark the Send Locations check box. The From and To fields become
enabled.
Site List field
drop-down
2283.book Page 303 Thursday, July 9, 2009 11:26 AM