Editing the user id, Editing the user id 55 – IntelliTrack Check In/Out User Manual
Page 83
Chapter 4
Setup
55
5.
To set a password for this user, place the cursor in the New Password
field. Enter the password in the New Password field; press the Tab key
to advance to the Verify field. Re-enter the password in the Verify field
to confirm it.
If you do not want to assign user passwords, leave the password field
blank. A blank password is a valid password.
6.
Select the Close button to close the form when you are finished.
7.
You are returned to the Users form; the newly added user is found in
the User ID column.
8.
The newly added user will have a security level of “1” by default. To
set the user access level, select the new user ID in the User ID column
(place the cursor next to the newly created user); and assign an access
level in the Level field (enter a value between 1-9).
9.
Repeat steps 2-7 to continue adding new users.
10.
After you are finished entering new users, click the Close button.
Editing the User ID
To edit the User ID refer to the instructions that follow.
1.
Select the Tools Command Tab > Security Command Set > Users.
2.
The Users form appears:
2283.book Page 55 Thursday, July 9, 2009 11:26 AM