Initiating a data sync from the batch utility, Sending information from the batch portable, Application to the batch portable utility 307 – IntelliTrack Check In/Out User Manual
Page 335: Initiating a data sync from the batch utility 307
Chapter 16
CE Data Transfer
307
19.
From the Main screen, select the Batch Portable application to open it.
The application will contain the newly sent data. For more information
about using the Batch Portable application, please refer to
Sending Information from the Batch Portable
Application to the Batch Portable Utility
Information for transactions performed on the handheld device such as
inventory moves and physical inventory counts are sent to the Batch Syn-
chronization Utility via the synchronization process. The data synchroniza-
tion process may be initiated from the handheld device or from the Batch
Synchronization Utility.
•
For more information about data synchronization via the Batch Syn-
chronization Utility, please refer to the following section.
•
For more information about data synchronization via the Batch Porta-
ble application on the handheld device, please refer to
“Syncing Data”
on page 326
.
Initiating a
Data Sync
from the
Batch Utility
To initiate a data sync with the Batch Portable application on the handheld
device from the Batch Synchronization Utility:
1.
From the Main form of the Batch Synchronization Utility, click the
Upload Processing tab to bring this portion of the form to the front.
2283.book Page 307 Thursday, July 9, 2009 11:26 AM