Installing the batch, Installing the batch portable application on the, Handheld device 264 – IntelliTrack Check In/Out User Manual

Page 292

Advertising
background image

I

NTELLI

T

RACK

C

HECK

I

N

-O

UT

V

7.0

User Manual

264

Installing the Batch Portable Application on the
Handheld Device

The CE Batch Portable application interface is installed on the handheld
device via the Batch Synchronization Utility:

1.

Select Portable Command Tab > Synchronize CE Device Command
Set > Synchronize CE Device.

2.

The Batch Synchronization Utility appears.

3.

From the Main form in the Batch Synchronization Utility, click the
Installation tab to bring this portion of the form to the front.

4.

Click the drop-down arrow in the Select an installation field, and
select the handheld device and operating system that you will use with
the Batch Portable application from the list that appears.

5.

After your device is selected, click the Install button to install the
handheld application. A dialog box appears, asking you to make sure
your handheld device is connected and ready to install the portable
application. Click OK to close the dialog box and continue installing
the batch portable application.

6.

The Installation Setup Wizard appears, welcoming you to the setup
wizard.

2283.book Page 264 Thursday, July 9, 2009 11:26 AM

Advertising