IntelliTrack Check In/Out - Manual (Page 190)

I NTELLI T RACK C HECK I N -O UT V 7.0
User Manual
162
3. Select a site from the Site List pull-down list where the item(s) being
checked in will be put-away.
The site field is automatically populated with the default site and can
only be changed before the first ItemID has been selected.
To add a new site, enter the value and press the TAB; click Yes when
asked if you would like to add this site.
4. Select the ItemID being checked in from the pull-down list in the Item
field and press TAB.
To select an ItemID from other than the currently selected site, enter a
value in the ItemID field; you cannot select it from the pull-down list.
When you check an ItemID from another site into the currently
selected site, you must check it into a location; you have the option to
make this location the normal location. If you select Yes, this location
becomes this ItemID’s normal location; if you select No, the normal
location remains unchanged.
When you select a check out item that is ready to be checked back into
the system, the system calculates the due date, due time, rental cost, etc.
If there are past due items associated with the item being checked in,
the Past Due button is enabled. Click the Past Due button to view a list
of past due items in the Check In form.
2283.book Page 162 Thursday, July 9, 2009 11:26 AM