IntelliTrack Check In/Out - Manual (Page 174)

I NTELLI T RACK C HECK I N -O UT V 7.0
User Manual
146
2. A dialog box appears, asking you if you want to add inventory to this
location:
3. To continue adding inventory, click Yes. The Item at Location form
appears.
4. Click the drop-down arrow in the Item# field and select the Item# of
the item to add to this location from the list that appears. Next, press the
TAB key to advance to the Location field.
5. Click the drop-down arrow in the Location field and select the loca-
tion to store the item from the list that appears; press the TAB key to
advance to the next field.
Note: The Lot field appears if you have enabled the Lot/Cust/Serial#
option in the Setup form/Options.
6. If applicable, enter lot data in the (optional) Lot field. Press the TAB
key to advance to the next field.
Note: You can only add items to locations that are located at the currently
selected site (current site is displayed in the Site field). To add an item to a
location at another site, click the Cancel button, select another site in the
Site pull-down list on the Location/Item# form and select the Add Loca-
tion for Item# button to continue adding items to a location.
Enter the quantity stored in the Quantity field.
By default, the logged in user is placed in the Inv ID field. If recording
an inventory add that was done by another user, click the drop-down
arrow in the Inv ID field and select the user from the list that appears.
2283.book Page 146 Thursday, July 9, 2009 11:26 AM