LevelOne FGL-2870 - Manual (Page 177)

General Security Measures
3-123
3
Command Attributes
• Filter ID (1-64) - top
- ALL – Displays all configured MAC filter tables.
- Filter ID – Displays all entries associated with the specified MAC Filter ID.
- Query – Displays all entries in the specified table(s).
• Filter ID - bottom
- Filter ID (1-64) – Adds or removes a filter rule for the specified filter.
- MAC Address – The filter rule will check ingress packets against the entered
MAC address or range of MAC addresses (as defined by the MAC mask).
- MAC Mask – The filter rule will check for the range of MAC addresses defined
by the MAC bit mask. If the user omits the mask, the system will assign the
default mask of an exact match. (Range: 000000000000 - FFFFFFFFFFFF;
Default: FFFFFFFFFFFF)
- Add – Adds a filter rule. There is no limitation on the number of entries that can
be used in a filter table.
- Remove – Removes the filter rule selected in the filter display. Multiple rules can
be selected and removed simultaneously.
Web – Click Security, Network Access, MAC Filter Configuration. To add a new filter
rule, enter the desired Filter ID, MAC Address and MAC Mask. Then click Add. To
search and display existing filter rules, choose All and click Query. To limit the
search, specify a Filter ID and click Query. To remove an existing filter, select the
desired rule(s) from those displayed by the query, and click Remove.
Figure 3-73 Network Access MAC Filter Configuration