LevelOne FGL-2870 - Manual (Page 563)

General Security Measures
4-197
4
show ip arp inspection vlan
This command shows the configuration settings for VLANs, including ARP
Inspection status, the ARP ACL name, and if the DHCP Snooping database is used
after ARP ACL validation is completed.
Syntax
show ip arp inspection vlan [vlan-id | vlan-range]
• vlan-id - VLAN ID. (Range: 1-4094)
• vlan-range - A consecutive range of VLANs indicated by the use a hyphen,
or a random group of VLANs with each entry separated by a comma.
Command Mode
Privileged Exec
Example
show ip arp inspection log
This command shows information about entries stored in the log, including the
associated VLAN, port, and address components.
Command Mode
Privileged Exec
Example
Console#show ip arp inspection vlan 1
VLAN ID DAI Status ACL Name ACL Status
-------- --------------- -------------------- --------------------
1 disabled sales static
Console#
Console#show ip arp inspection log
Total log entries number is 1
Num VLAN Port Src IP Address Dst IP Address Src MAC Address Dst MAC Address
--- ---- ---- -------------- -------------- --------------- ---------------
1 1 11 192.168.2.2 192.168.2.1 00-04-E2-A0-E2-7C FF-FF-FF-FF-FF-FF
Console#