LevelOne FGL-2870 - Manual (Page 497)

Authentication Commands
4-131
4
authorization exec
This command applies an authorization method to local console or Telnet
connections. Use the no form to disable authorization on the line.
Syntax
authorization exec {default | list-name}
no authorization exec
• default - Specifies the default method list created with the aaa
authorization exec command (page 4-130).
• list-name - Specifies a method list created with the aaa authorization exec
command.
Default Setting
None
Command Mode
Line Configuration
Example
show accounting
This command displays the current accounting settings per function and per port.
Syntax
show accounting [commands [level]] |
[[dot1x [statistics [username user-name | interface interface]] |
exec [statistics] | statistics]
• commands - Displays command accounting information.
• level - Displays command accounting information for a specifiable
command level.
• dot1x - Displays dot1x accounting information.
• exec - Displays Exec accounting records.
• statistics - Displays accounting records.
• user-name - Displays accounting records for a specifiable username.
• interface
ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
Default Setting
None
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#