LevelOne FGL-2870 - Manual (Page 345)

Multicast VLAN Registration
3-291
3
Web – Click MVR, Configuration. Enable MVR globally on the switch, select the
MVR VLAN, add the multicast groups that will stream traffic to attached hosts, and
then click Apply.
Figure 3-166 MVR Global Configuration
CLI – This example first enables IGMP snooping, enables MVR globally, and then
configures a range of MVR group addresses.
Console(config)#ip igmp snooping 4-375
Console(config)#mvr 4-392
Console(config)#mvr group 228.1.23.1 10 4-392
Console(config)#