LevelOne FGL-2870 - Manual (Page 498)

Command Line Interface
4-132
4
Command Mode
Privileged Exec
Example
Web Server Commands
This section describes commands used to configure web browser management
access to the switch.
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Console#show accounting
Accounting type: dot1x
Method list: default
Group list: radius
Interface:
Method list: tps
Group list: radius
Interface: eth 1/2
Accounting type: Exec
Method list: default
Group list: radius
Interface: vty
Console#
Table 4-34 Web Server Commands
Command Function Mode Page
ip http port Specifies the port to be used by the web browser interface GC 4-132
ip http server Allows the switch to be monitored or configured from a browser GC 4-133
ip http secure-server Enables HTTPS for encrypted communications GC 4-133
ip http secure-port Specifies the UDP port number for HTTPS GC 4-134