LevelOne FGL-2870 - Manual (Page 463)

SNMP Commands
4-97
4
Command Usage Command Usage
• Views are used in the snmp-server group command to restrict user access
to specified portions of the MIB tree.
• The predefined view “defaultview” includes access to the entire MIB tree.
Examples
This view includes MIB-2.
This view includes the MIB-2 interfaces table, ifDescr. The wild card is used to select
all the index values in this table.
This view includes the MIB-2 interfaces table, and the mask selects all index entries.
show snmp view
This command shows information on the SNMP views.
Command Mode
Privileged Exec
Example
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
Table 4-23 show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.