LevelOne FGL-2870 - Manual (Page 681)

VLAN Commands
4-315
4
pvlan up-to-up
This command specifies whether or not traffic can be forwarded between uplink
ports assigned to different client sessions. Use the no form to restore the default.
Syntax
[no] pvlan up-to-up {blocking | forwarding}
• blocking – Blocks traffic between uplink ports assigned to different
sessions.
• forwarding – Forwards traffic between uplink ports assigned to different
sessions.
Default Setting
Blocking
Command Mode
Global Configuration
Example
This example enables forwarding of traffic between uplink ports assigned to different
client sessions.
show pvlan
This command displays the traffic segmentation configuration settings.
Syntax
show pvlan [session session-id]
session-id – Traffic segmentation session. (Range: 1-15)
Command Mode
Privileged Exec
Example
Console(config)#pvlan up-to-up
Console(config)#
Console#show pvlan
Private VLAN Status : Enabled
Uplink-to-Uplink Mode : Blocking
Session Uplink Ports Downlink Ports
--------- ------------------------------ -----------------------------
1 Ethernet 1/28 Ethernet 1/9
Ethernet 1/10
Ethernet 1/11
Console#