LevelOne FGL-2870 - Manual (Page 595)

Interface Commands
4-229
4
Example
show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 3-155.
Console#show interfaces brief
Console#sh interfaces brief
Interface Name Status PVID Pri Speed/Duplex Type Trunk
--------- ------------------ -------- ---- --- ------------- ------------ -----
Eth 1/ 1 Up 1 0 Auto-100full 100TX None
Eth 1/ 2 Down 1 0 Auto 100TX None
Eth 1/ 3 Down 1 0 Auto 100TX None
Eth 1/ 4 Down 1 0 Auto 100TX None
Eth 1/ 5 Down 1 0 Auto 100TX None
Eth 1/ 6 Down 1 0 Auto 100TX None
Eth 1/ 7 Down 1 0 Auto 100TX None
Eth 1/ 8 Down 1 0 Auto 100TX None
.
.
.