Banner information commands, Table 4-8, Banner commands – LevelOne FGL-2870 User Manual
Page 385
System Management Commands
4-19
4
Example
Banner Information Commands
These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as contact information for the network
administrator and system manager. This information is only available via the CLI and
is automatically displayed before login as soon as a console or telnet connection has
been established.
Console(config)#hostname RD#1
Console(config)#
Table 4-8 Banner Commands
Command
Function
Mode
Page
banner configure
Configures the banner information that is displayed before login GC
banner configure
company
Configures the Company information that is displayed by banner GC
banner configure
dc-power-info
Configures the DC Power information that is displayed by
banner
GC
banner configure
department
Configures the Department information that is displayed by
banner
GC
banner configure
equipment-info
Configures the Equipment information that is displayed by
banner
GC
banner configure
equipment-location
Configures the Equipment Location information that is displayed
by banner
GC
banner configure
ip-lan
Configures the IP and LAN information that is displayed by
banner
GC
banner configure
lp-number
Configures the LP Number information that is displayed by
banner
GC
banner configure
manager-info
Configures the Manager contact information that is displayed by
banner
GC
banner configure
mux
Configures the MUX information that is displayed by banner
GC
banner configure
note
Configures miscellaneous information that is displayed by
banner under the Notes heading
GC
show banner
Displays all banner information
NE, PE